How to Fix Starter in Car

Introduction

Starting a car is one of the most important things that every car owner needs to know. A car starter is a device that helps to start the engine of a car. A faulty starter can make it difficult or even impossible to start the car. In this article, we will discuss how to fix the starter in a car.

Identify the Problem

The first step in fixing a car starter is to identify the problem. The most common problem with a car starter is a dead battery. You should check the battery voltage with a multimeter to ensure that it is not the problem. If the battery is good, you should move on to the starter motor.

Check the Connections

The next step is to check the connections of the starter motor. The connections should be clean and tight. If there is any corrosion or looseness, it can cause the starter to fail. You should clean the connections and tighten them if necessary.

Inspect the Starter Motor

After checking the connections, you should inspect the starter motor. If the starter motor is faulty, it will need to be replaced. You can test the starter motor by using a volt-ohm meter. If the motor is not working, you should replace it with a new one.

Replace the Starter Solenoid

If the starter motor is working but the car is still not starting, the problem may be with the starter solenoid. The starter solenoid is responsible for engaging the starter motor. You should replace the starter solenoid if it is not working properly.

Inspect the Flywheel

The flywheel is a large gear that is attached to the engine. The starter motor engages with the flywheel to start the engine. If the flywheel is damaged or worn out, it will not engage with the starter motor properly. You should inspect the flywheel and replace it if necessary.

Replace the Ignition Switch

If the car is still not starting, the problem may be with the ignition switch. The ignition switch is responsible for supplying power to the starter motor. You should replace the ignition switch if it is not working properly.

Check the Wiring

If all of the above steps fail to fix the problem, you should check the wiring. The wiring should be inspected for any breaks or damage. You should repair or replace any damaged wiring.

Conclusion

Fixing a car starter may seem like a daunting task, but it is not as difficult as it seems. By following the above steps, you can easily fix the starter in your car. If you are not comfortable doing it yourself, you should take your car to a mechanic.