How to Fix an Electric Window in a Car

Introduction

Electric windows are a great convenience in a car, but they can be a real pain when they stop working. If your electric window is not working properly, it can be due to several reasons. In this article, we will guide you on how to fix an electric window in a car.

Determine the Problem

The first step in fixing an electric window is to determine the problem. If the window is not working at all, it could be due to a blown fuse or a broken switch. If the window is working but not rolling up or down properly, it could be due to a problem with the motor or the regulator.

Check the Fuses and Switches

If the electric window is not working at all, the first thing to check is the fuses and switches. The fuse box is usually located under the dashboard or in the engine compartment. Check the owner’s manual to locate the fuse for the electric windows. If the fuse is blown, replace it with a new one of the same amperage. If the fuse is okay, check the switches. Sometimes the switches can get dirty or worn out, causing the electric windows to stop working.

Check the Motor and Regulator

If the electric window is working but not rolling up or down properly, it could be due to a problem with the motor or regulator. The motor is usually located inside the door panel and can be accessed by removing the door panel. The regulator is a mechanism that controls the up and down movement of the window. It is usually located inside the door panel as well. Check both the motor and regulator for any signs of damage or wear and tear. If either of them is damaged, it will need to be replaced.

Replace the Motor or Regulator

If you have determined that the motor or regulator is the problem, you will need to replace it. You can purchase a new motor or regulator from an auto parts store or online. To replace the motor or regulator, first, remove the door panel. Then, disconnect the wiring harness from the motor or regulator. Remove the bolts that hold the motor or regulator in place and remove it from the door panel. Install the new motor or regulator and reattach the wiring harness and bolts. Finally, reinstall the door panel.

Test the Window

After you have fixed the problem, test the window to make sure it is working properly. Use the window switch to roll the window up and down a few times to make sure it is working smoothly.

Maintenance Tips

To prevent your electric windows from breaking down, here are a few maintenance tips:- Keep the switches and motor clean and free of dirt and debris- Do not slam the doors as it can damage the window mechanism- Lubricate the window tracks and rollers regularly to prevent wear and tear

Conclusion

Fixing an electric window in a car is not difficult, but it does require some knowledge and patience. By following the steps outlined in this article, you should be able to fix most electric window problems. Remember to always take safety precautions when working on your car’s electrical system.