How to Get Spare Tire Out from Under Truck

0 Views

Flat tire is a common issue that most drivers face. That’s why it’s important to have a spare tire in your vehicle. However, getting the spare tire out from under the truck can be a daunting task, especially if you’ve never done it before. In this article, we’ll take you through the step-by-step process of how to get a spare tire out from under your truck.

Fast Read : show

Step 1: Locate the Spare Tire

The first step is to locate where the spare tire is stored. In most trucks, the spare tire is stored underneath the vehicle, usually at the rear. Look for a circular cap on the rear bumper or under the truck bed. This cap covers the hole where the tire lowering mechanism is located.

Step 2: Remove the Cap

Use a screwdriver or a tire iron to remove the cap. You may need to turn it counterclockwise to loosen it. Once the cap is removed, you’ll see the tire lowering mechanism.

Step 3: Lower the Spare Tire

Insert the tire iron into the hole in the center of the tire lowering mechanism. Turn the tire iron counterclockwise to lower the spare tire. Keep turning until the spare tire touches the ground. You may need to use some force to get the tire to lower.

Step 4: Remove the Spare Tire

Once the spare tire is on the ground, remove the retaining clamp that holds the tire in place. You may need to use pliers to loosen the clamp. Once the clamp is removed, pull the tire out from under the truck.

Step 5: Replace the Flat Tire

Now that you have the spare tire, you can replace the flat tire. Use the tire iron to remove the lug nuts from the flat tire. Remove the flat tire and replace it with the spare tire. Tighten the lug nuts by hand, then use the tire iron to tighten them further.

Step 6: Raise the Vehicle

Once the spare tire is securely fastened, use the tire iron to raise the vehicle. Turn the tire iron clockwise to raise the vehicle. Keep turning until the vehicle is high enough off the ground to remove the jack.