Having a dead battery in your key fob can be a frustrating experience, especially if you don’t know how to change it. In this article, we will guide you through the step-by-step process of changing the battery in your 2019 Buick Enclave key fob.
Step 1: Locate the Key Fob
The key fob is a small rectangular device that allows you to lock, unlock and start your car without having to insert the key into the door or ignition. It is usually found in your pocket, purse, or on a keychain.
Step 2: Identify the Battery Type
Before changing the battery, you need to know the type of battery your key fob uses. The 2019 Buick Enclave key fob uses a CR2032 battery, which is a small, flat, round battery commonly found in electronic devices.
Step 3: Open the Key Fob
Most key fobs have a small indentation or slot where you can insert a flat object such as a screwdriver or a coin to pry open the case. Carefully pry open the key fob to reveal the battery compartment.
Step 4: Remove the Old Battery
Using a small flat object like a screwdriver, gently push the old battery out of its compartment. Be careful not to damage the battery or the compartment while doing this.
Step 5: Insert the New Battery
Insert the new CR2032 battery into the compartment with the positive (+) side facing up. Gently press down on the battery to make sure it’s properly seated in its compartment.
Step 6: Close the Key Fob
Carefully snap the key fob back together. Make sure that the two halves of the fob are properly aligned and that there are no gaps or loose parts.
Step 7: Test the Key Fob
Test the key fob by pressing the buttons to lock and unlock your car. If the key fob is working properly, your car should respond immediately.
Step 8: Dispose of the Old Battery
Dispose of the old battery properly. Do not throw it in the trash or leave it lying around where children or pets can find it. Instead, take it to a recycling center or a designated battery drop-off location.
Step 9: Keep a Spare Battery
It’s always a good idea to keep a spare battery handy in case your key fob battery dies unexpectedly. You can purchase a replacement CR2032 battery at most electronics stores or online retailers.
Step 10: Conclusion
Changing the battery in your 2019 Buick Enclave key fob is a simple process that can be done in just a few minutes. By following these easy steps, you can save yourself the time and hassle of having to take your car to a dealership or mechanic to have the battery replaced.
People Also Ask
What kind of battery does a 2019 Buick Enclave key fob use?
The 2019 Buick Enclave key fob uses a CR2032 battery, which is a small, flat, round battery commonly found in electronic devices.
Where can I buy a replacement battery for my 2019 Buick Enclave key fob?
You can purchase a replacement CR2032 battery at most electronics stores or online retailers.
Do I need to reprogram my key fob after changing the battery?
No, you do not need to reprogram your key fob after changing the battery. The key fob should work immediately after the new battery is installed.