MyVans Your Vehicle Solution
Power steering is an essential feature that makes driving easier and more comfortable. However, when it fails, it can be frustrating and even dangerous. If you own a Ford Fusion and you’re experiencing power steering assist fault, don’t worry; this article will guide you on how to fix it.
What Causes Power Steering Assist Fault on Ford Fusion?
The power steering assist fault on Ford Fusion is usually caused by a faulty power steering control module or a bad electric power steering motor. Other possible causes include a damaged steering gear, low power steering fluid level, and a faulty steering wheel position sensor.
Diagnosing the Problem
The first step in fixing power steering assist fault on Ford Fusion is to diagnose the problem. To do this, you need to connect a scan tool to the vehicle’s OBD-II port and retrieve any error codes that may be present. This will give you an idea of what’s causing the problem.
Replacing the Power Steering Control Module
If the scan tool reveals that the power steering control module is faulty, you need to replace it. The power steering control module is located under the steering column, and you can access it by removing the lower dash panel. Once you’ve located the module, unplug it and replace it with a new one. Make sure to follow the manufacturer’s instructions for installation.
Replacing the Electric Power Steering Motor
If the power steering motor is faulty, you need to replace it. The electric power steering motor is located on the steering column, and you can access it by removing the steering column cover. Once you’ve located the motor, unplug it and replace it with a new one. Make sure to follow the manufacturer’s instructions for installation.
Checking the Power Steering Fluid Level
Low power steering fluid level can also cause power steering assist fault. To check the fluid level, locate the power steering fluid reservoir under the hood, and check the fluid level. If it’s low, add more fluid until it reaches the recommended level.
Replacing the Steering Gear
If the steering gear is damaged, you need to replace it. The steering gear is located on the steering column, and you can access it by removing the steering column cover. Once you’ve located the gear, unplug it and replace it with a new one. Make sure to follow the manufacturer’s instructions for installation.
Replacing the Steering Wheel Position Sensor
If the steering wheel position sensor is faulty, you need to replace it. The sensor is located on the steering column, and you can access it by removing the steering column cover. Once you’ve located the sensor, unplug it and replace it with a new one. Make sure to follow the manufacturer’s instructions for installation.
People Also Ask:
Q: Can power steering assist fault cause accidents?
A: Yes, it can. When power steering fails, it can make it difficult to steer the vehicle, especially at low speeds or when making turns. This can lead to accidents.
Q: Is it safe to drive with power steering assist fault?
A: It’s not recommended to drive with power steering assist fault, as it can be dangerous. If you must drive, be cautious and drive at a slow speed.
Q: How much does it cost to fix power steering assist fault on Ford Fusion?
A: The cost of fixing power steering assist fault on Ford Fusion varies depending on the cause of the problem and where you take your vehicle for repair. On average, it can cost anywhere from $500 to $1500.
