MyVans Your Vehicle Solution
It’s always frustrating when your car won’t start, but it’s even more frustrating when you don’t have jumper cables or a jump starter. If you’re in this situation with your Ford Escape, don’t worry! We’ve got you covered. In this article, we’ll explain how to jump a Ford Escape without any extra equipment. Follow these steps and you’ll be back on the road in no time!
Step 1: Park the Cars Close Together
Park the car that has a good battery close to your Ford Escape. Make sure both cars are in neutral or park with the parking brake on. Turn off both engines and remove the keys from the ignition.
Step 2: Locate the Battery
Open the hood of both cars and locate the battery. In the Ford Escape, the battery is located on the driver’s side, near the front of the engine compartment.
Step 3: Connect the Jumper Cables
Take the jumper cables and connect the positive (+) cable to the positive terminal on the good battery. Then connect the other end of the positive cable to the positive terminal on the dead battery in your Ford Escape. Next, connect the negative (-) cable to the negative terminal on the good battery. Finally, connect the other end of the negative cable to an unpainted metal surface on your Ford Escape’s engine block. Do not connect the negative cable to the negative terminal on the dead battery!
Step 4: Start the Good Car and Let it Run
Start the car with the good battery and let it run for a few minutes. This will charge the dead battery in your Ford Escape.
Step 5: Start Your Ford Escape
Try to start your Ford Escape. It may take a few tries, but eventually, it should start. If it doesn’t start, wait a few more minutes and try again.
Step 6: Remove the Jumper Cables
Once your Ford Escape has started, remove the jumper cables in the reverse order that you connected them. First, remove the negative cable from the engine block on your Ford Escape. Then remove the negative cable from the good battery. Next, remove the positive cable from the good battery. Finally, remove the positive cable from the dead battery in your Ford Escape.
Step 7: Let Your Ford Escape Run
Let your Ford Escape run for at least 30 minutes to ensure that the battery is fully charged. If you turn off the engine and it won’t start again, you may need to repeat the jump-start process or replace the battery.
Step 8: Take Precautions
Jump-starting a car can be dangerous if not done properly. Always wear eye protection and gloves while handling the cables. Make sure the cables are not touching each other or any metal surfaces while they are connected to the batteries. If you’re not comfortable jump-starting your car, call a professional.
Step 9: People Also Ask – How Long Should You Drive After Jump Starting a Car?
It’s recommended that you drive your car for at least 30 minutes after jump-starting to allow the battery to fully recharge. However, if you’re driving on the highway, the battery may recharge faster.
Step 10: People Also Ask – Can You Jump Start a Car with a Bad Alternator?
No, you cannot jump-start a car with a bad alternator. The alternator is responsible for charging the battery while the engine is running. If the alternator is bad, the battery will not charge and your car will eventually die. If you suspect your alternator is bad, have it checked by a professional mechanic.
