How to Jump Start a Ford Fusion Hybrid

If you are a proud owner of a Ford Fusion Hybrid, you know how important it is to keep your vehicle in top condition. However, there may come a time when your car battery dies and you need to jump start it. Jump starting a hybrid car is not like jump starting a traditional car. In this article, we will guide you through the process of how to jump start a Ford Fusion Hybrid.

Step 1: Safety First

Before you do anything, make sure that you are parked in a safe location away from traffic. Turn off your car and engage the parking brake. Wear gloves and safety glasses to protect yourself from any sparks or battery acid.

Step 2: Locate the Battery

The next step is to locate the battery in your Ford Fusion Hybrid. In most cases, the battery is located in the trunk of the car. However, some models may have the battery under the hood. Refer to your owner’s manual for specific instructions on where to find the battery.

Step 3: Connect the Jumper Cables

Once you have located the battery, it’s time to connect the jumper cables. First, connect the positive cable (usually red) to the positive terminal on the dead battery. Then, connect the other end of the positive cable to the positive terminal on the charged battery. Next, connect the negative cable (usually black) to the negative terminal on the charged battery. Finally, connect the other end of the negative cable to an unpainted metal surface on your car’s body.

Step 4: Start the Charged Car

Start the car with the charged battery and let it run for a few minutes. This will allow the battery to charge up a bit before you try to start your Ford Fusion Hybrid.

Step 5: Start Your Ford Fusion Hybrid

Once the charged car has been running for a few minutes, attempt to start your Ford Fusion Hybrid. If it starts, let it run for a few minutes to allow the battery to charge up a bit more. If it doesn’t start, wait a few more minutes and try again.

Step 6: Disconnect the Jumper Cables

Once your Ford Fusion Hybrid has started, it’s time to disconnect the jumper cables. Do this in the reverse order that you connected them – negative cable from the unpainted metal surface, negative cable from the charged battery, positive cable from the charged battery, and finally, positive cable from the dead battery.

Step 7: Let Your Ford Fusion Hybrid Run

After jump starting your Ford Fusion Hybrid, let it run for at least 20 minutes to allow the battery to charge up fully. This will ensure that your car is ready to go when you need it.

Now that you know how to jump start a Ford Fusion Hybrid, you can be prepared if your battery ever dies. Remember to always follow safety precautions and refer to your owner’s manual for specific instructions. Happy driving!

People Also Ask

How long does it take to jump start a hybrid car?

It can take anywhere from 5 to 30 minutes to jump start a hybrid car, depending on how dead the battery is and how long you let the charged car run before attempting to start your car.

Can I jump start my hybrid car with a traditional jumper cable?

Yes, you can jump start your hybrid car with a traditional jumper cable. However, it’s important to follow the specific instructions for your car as outlined in the owner’s manual.

What should I do if my Ford Fusion Hybrid won’t jump start?

If your Ford Fusion Hybrid won’t jump start, it may be time to replace the battery. Contact your local Ford dealership for assistance.

Related video of How to Jump Start a Ford Fusion Hybrid