MyVans Your Vehicle Solution
Jumpstarting a car can be a daunting task, especially if you’re not familiar with the process. In this article, we’ll guide you through the steps to jumpstarting a 2017 Ford Escape. Before proceeding, make sure you have the necessary tools: a set of jumper cables and another vehicle with a charged battery.
Step 1: Position the Vehicles
Park both vehicles facing each other and turn off the engines. Make sure the vehicles are not touching and the distance between them is not too far. Also, ensure the jumper cables can reach both batteries comfortably.
Step 2: Connect Positive Cables
Identify the positive (+) and negative (-) terminals on each battery. The positive terminal is usually marked with a (+) sign, and the negative terminal is marked with a (-) sign. Connect one end of the red (positive) jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the live battery.
Step 3: Connect Negative Cables
Next, connect one end of the black (negative) jumper cable to the negative terminal of the live battery. Instead of connecting the other end of the cable to the negative terminal of the dead battery, connect it to an unpainted metal surface of the dead car’s engine. This will reduce the risk of sparks and potential explosions.
Step 4: Start the Live Vehicle
Start the engine of the live vehicle and let it run for a few minutes. This will allow the dead battery to charge slightly before attempting to start the dead vehicle.
Step 5: Start the Dead Vehicle
Attempt to start the dead vehicle. If it doesn’t start, let it continue to charge for a few more minutes before attempting again. Once it starts, let both vehicles run for a few minutes before disconnecting the cables.
Step 6: Disconnect the Cables
Disconnect the cables in the reverse order: negative from the dead vehicle, negative from the live vehicle, positive from the live vehicle, and finally, positive from the dead vehicle.
That’s it! Your 2017 Ford Escape should now be running again. Remember to dispose of the jumper cables properly and to drive around for a while to ensure the battery is fully charged.
People Also Ask
What happens if you jumpstart a car wrong?
If you jumpstart a car incorrectly, it can cause damage to both vehicles’ electrical systems, including the alternators, fuses, and other components. This can lead to costly repairs or even the need to replace the entire electrical system.
Can a dead battery be recharged?
Yes, a dead battery can be recharged using a battery charger or by jumpstarting the vehicle with another car. However, if the battery is too old or has been damaged, it may need to be replaced.
