MyVans Your Vehicle Solution
Checking the transmission fluid of your 2013 Ford Escape is an important part of ensuring that your car runs smoothly. The transmission fluid is the lifeblood of your car’s transmission system and it helps to keep the gears properly lubricated. If the transmission fluid is low, it can cause serious damage to your car’s transmission. In this article, we will show you how to check the transmission fluid of your 2013 Ford Escape.
Step 1: Park Your Car
The first step is to park your car on a level surface and turn off the engine. Make sure that the car is in park mode and the parking brake is engaged. This will ensure that the car is stable and won’t move while you’re checking the transmission fluid.
Step 2: Locate the Transmission Dipstick
The next step is to locate the transmission dipstick. The dipstick is usually located near the back of the engine compartment, towards the firewall. It is usually marked with a yellow or red handle.
Step 3: Remove the Dipstick
Once you have located the dipstick, remove it from the transmission. Wipe it clean with a cloth or paper towel. Make sure that there is no dirt or debris on the dipstick.
Step 4: Check the Transmission Fluid Level
Insert the dipstick back into the transmission and then remove it again. Look at the end of the dipstick to see where the fluid level is. If the fluid level is between the “full” and “add” marks, then the transmission fluid level is good.
If the fluid level is below the “add” mark, then you need to add more transmission fluid. Make sure that you use the correct type of transmission fluid for your 2013 Ford Escape.
Step 5: Add Transmission Fluid
If the fluid level is low, you need to add more transmission fluid. Open the hood of your car and locate the transmission filler tube. It is usually located near the back of the engine compartment.
Remove the transmission filler cap and add the transmission fluid using a funnel. Make sure that you add the correct type of transmission fluid for your car.
Step 6: Recheck the Fluid Level
After adding the transmission fluid, recheck the fluid level using the dipstick. Make sure that the fluid level is between the “full” and “add” marks.
By following the steps above, you can easily check the transmission fluid of your 2013 Ford Escape. It is important to check the transmission fluid regularly to ensure that your car runs smoothly and that there is no damage to the transmission.
People Also Ask
Q: How often should I check the transmission fluid in my 2013 Ford Escape?
A: It is recommended to check the transmission fluid every 30,000 miles or 2 years, whichever comes first.
Q: What type of transmission fluid should I use for my 2013 Ford Escape?
A: You should use the type of transmission fluid recommended in your owner’s manual.
Q: Can I check the transmission fluid while the engine is running?
A: It is not recommended to check the transmission fluid while the engine is running.
