How to Fix Cigarette Burns in Car Roof: A Step-by-Step Guide

Smoking inside a car can leave unsightly burn marks on the roof, which can be a hassle to remove. However, the good news is that you can fix cigarette burns in car roof with some simple steps. In this article, we will guide you on how to fix cigarette burns in car roof and make your car look as good as new.

Step 1: Gather the Materials

The first step is to gather all the materials you will need for this process. You will need a microfiber cloth, sandpaper, a can of compressed air, a plastic scraper, a heat gun, and touch-up paint that matches the color of your car.

Step 2: Clean the Burned Area

Before fixing the burn, you need to clean the area. Use the microfiber cloth and wipe the area to remove any dirt or debris on the surface.

Step 3: Sand the Burned Area

Use the sandpaper to sand down the burned area gently. Make sure to sand in the same direction as the grain of the roof material. Sand until the surface is smooth and all the burned material is removed.

Step 4: Blow Away Debris

Use the compressed air to blow away any debris or dust from the sanded area.

Step 5: Heat the Area

Using the heat gun, heat the area around the burn mark. This will make the roof material pliable, which will make it easier to repair. Be careful not to heat the area too much as it can cause more damage to the roof.

Step 6: Smooth Out the Burnt Area

Use the plastic scraper to smooth out the burnt area. This will help to blend the area with the rest of the roof.

Step 7: Apply Touch-Up Paint

Using the touch-up paint, apply a thin layer of paint over the repaired area. Make sure to use the same color as the rest of the roof.

Step 8: Let the Paint Dry

Allow the paint to dry completely. This may take a few hours, depending on the temperature and humidity.

Step 9: Sand the Painted Area

After the paint has dried, use the sandpaper to sand down the painted area gently. This will help to blend the repaired area with the rest of the roof.

Step 10: Polish the Area

Finally, polish the repaired area with a microfiber cloth to give it a shiny finish.