MyVans Your Vehicle Solution
Introduction
At times, you need to use your car’s cigarette lighter to charge your phone or other electronic devices. However, when it stops working, it can be frustrating. In this article, we will discuss how to fix the cigarette lighter in your car.
Check the Fuse
The first thing you need to do when your cigarette lighter stops working is to check the fuse. The fuse box is usually located under the dashboard or in the engine compartment. Check the owner’s manual to locate the fuse for the cigarette lighter. Replace the fuse if it is blown.
Clean the Cigarette Lighter
Over time, dirt and debris can accumulate in the cigarette lighter socket, preventing it from making contact with the lighter. Use a cotton swab or a soft-bristled brush to clean the socket. You can also use compressed air to blow out any debris that may be inside.
Check the Wiring
If the fuse is not the problem, then the wiring may be the issue. Check the wiring that goes to the cigarette lighter. Look for any signs of damage or corrosion. If you find any, then you may need to replace the wiring.
Replace the Cigarette Lighter Assembly
If the above methods do not work, then you may need to replace the entire cigarette lighter assembly. You can find replacement parts at your local auto parts store or online. Make sure to get the right one for your car’s make and model.
Tools You May Need
To fix your car’s cigarette lighter, you may need some tools. These include a fuse puller, pliers, wire cutters, and a screwdriver. Make sure to have these tools on hand before you begin.
Safety Precautions
Before you start fixing your car’s cigarette lighter, make sure to take some safety precautions. Turn off the engine and remove the key from the ignition. Wear gloves to protect your hands and avoid touching any wires or metal parts.
Conclusion
Fixing your car’s cigarette lighter is a simple task that you can do yourself. Start by checking the fuse and cleaning the socket. If that does not work, then check the wiring and replace the assembly if necessary. Remember to take safety precautions and have the right tools on hand.
