If you own a 2014 Ford Escape and your battery is dead, you’ll need to replace it. Here’s a step-by-step guide on how to change your battery in your Ford Escape.
Step 1: Gather the Necessary Tools
Before you start changing your battery, you’ll need to gather some tools. You’ll need a wrench or pliers, a battery terminal cleaner, a new battery and a wire brush. Make sure you purchase the correct battery for your Ford Escape.
Step 2: Locate the Battery
The battery is located under the hood on the driver’s side of the vehicle. Open your hood and locate the battery. Be sure to take note of how the battery is positioned and how it’s connected.
Step 3: Disconnect the Negative Terminal
Using a wrench or pliers, loosen the nut on the negative terminal and remove the cable from the battery. Be sure to move the cable away from the battery to prevent it from touching any metal parts of the vehicle.
Step 4: Disconnect the Positive Terminal
Using the same technique as step 3, remove the cable from the positive terminal.
Step 5: Remove the Battery
Using a wrench or pliers, remove the bolt that secures the battery to the vehicle. Carefully lift the battery out of the vehicle, being sure not to damage any surrounding parts.
Step 6: Clean the Battery Terminals
Using a battery terminal cleaner or wire brush, clean any corrosion or buildup off of the terminals. This will ensure a good connection for your new battery.
Step 7: Install the New Battery
Carefully place the new battery in the same position as the old one. Replace the bolt to secure the battery to the vehicle.
Step 8: Reconnect the Positive Terminal
Connect the positive cable to the positive terminal and tighten the nut with a wrench or pliers.
Step 9: Reconnect the Negative Terminal
Connect the negative cable to the negative terminal and tighten the nut with a wrench or pliers.
Step 10: Test the Battery
Start your Ford Escape to make sure the new battery is working properly. If it doesn’t start, double check all connections and try again.
Changing a battery in a 2014 Ford Escape is relatively easy with the right tools and some basic knowledge. By following these simple steps, you can have a new battery installed in no time!