How to Change Battery 2014 Ford Escape

0 Views

Changing the battery on your 2014 Ford Escape can be an intimidating task, especially if you’ve never changed a car battery before. However, with the right tools and a little bit of know-how, you can easily replace your battery and get your car running smoothly again.

Fast Read : show

Gather Your Tools

Before you begin, you’ll need to gather a few tools. You’ll need a pair of gloves, a wrench, a socket set, and a new battery that is designed to fit your 2014 Ford Escape.

Locate the Battery

The battery on your 2014 Ford Escape is located in the engine compartment, on the driver’s side. To access the battery, you’ll need to open the hood of your car.

Remove the Negative Cable

Before you begin removing the battery, you’ll need to disconnect the negative cable. This cable is usually black and is connected to the battery with a nut. Use a wrench to loosen the nut and then pull the cable off the battery.

Remove the Positive Cable

Next, you’ll need to remove the positive cable. This cable is usually red and is also connected to the battery with a nut. Use a wrench to loosen the nut and then pull the cable off the battery.

Remove the Battery

Once you’ve removed both cables, you can now remove the battery. The battery is usually held in place with a bracket. Use a socket set to remove the bracket and then lift the battery out of the engine compartment.

Install the New Battery

Place the new battery in the engine compartment and secure it with the bracket. Then, connect the positive cable to the positive terminal on the battery and tighten the nut with a wrench. Finally, connect the negative cable to the negative terminal on the battery and tighten the nut with a wrench.

Test the Battery

After you’ve installed the new battery, start your car to make sure everything is working properly. If your car starts with no issues, then you’ve successfully changed the battery on your 2014 Ford Escape!