MyVans Your Vehicle Solution If you own a Ford Focus, there’s a chance that you might face power steering assist fault at some point. This issue can be frustrating, especially when you’re on the road. However, the good news is that it’s possible to fix the problem and get your car back to normal. In this article, we’ll take a look at how to fix power steering assist fault in Ford Focus.
What is Power Steering Assist Fault?
Power steering assist fault is a common issue in Ford Focus. It occurs when the power steering system malfunctions and fails to provide the necessary assistance to the driver. This problem can result in difficulty turning the steering wheel, making it challenging to control the car. If you experience this issue, it’s essential to take action immediately, as it can be dangerous to drive with a faulty power steering system.
What Causes Power Steering Assist Fault?
Several factors can cause power steering assist fault in Ford Focus. One of the most common causes is a failed power steering control module. The power steering control module is responsible for regulating the power steering system, and when it fails, the system can malfunction. Other causes of power steering assist fault include a faulty electric power-assisted steering (EPAS) motor, a damaged steering gear, or a low power steering fluid level.
How to Fix Power Steering Assist Fault Ford Focus
The first step in fixing power steering assist fault in Ford Focus is to diagnose the problem. This requires connecting the car to a diagnostic tool to identify the fault code. Once you have identified the fault code, you can then take the necessary steps to fix the problem.
If the problem is caused by a failed power steering control module, you will need to replace it. This requires disconnecting the battery, removing the old module, and installing the new one. Once the new module is installed, you will need to reconnect the battery and reset the system using a diagnostic tool.
If the issue is caused by a faulty EPAS motor, you will need to replace it. This requires removing the old motor and installing the new one. Once the new motor is installed, you will need to recalibrate the system using a diagnostic tool.
If the problem is caused by a low power steering fluid level, you will need to top up the fluid. To do this, locate the power steering fluid reservoir and remove the cap. Add the recommended power steering fluid to the reservoir until it reaches the maximum level. Replace the cap and start the car to check if the problem is resolved.
Preventing Power Steering Assist Fault Ford Focus
Prevention is always better than cure, and there are several things you can do to prevent power steering assist fault in Ford Focus. Regular servicing and maintenance of the power steering system can go a long way in preventing issues. This includes checking the power steering fluid level and replacing it if necessary, inspecting the power steering hoses for leaks, and checking the power steering belt for wear and tear.
It’s also essential to avoid overloading your car, as this can strain the power steering system, leading to failure. Finally, avoid driving on rough roads as much as possible, as this can damage the power steering components.
Conclusion
Power steering assist fault in Ford Focus can be frustrating, but it’s possible to fix the problem and get your car back to normal. If you experience this issue, don’t hesitate to take action, as it can be dangerous to drive with a faulty power steering system. Regular maintenance and servicing of the power steering system can go a long way in preventing issues, so make sure to take care of your car to avoid power steering assist fault.
