MyVans Your Vehicle Solution Windscreen washer jets are an essential component of a car’s cleaning system. They help to clean the windscreen and improve visibility while driving. However, like any other part of a car, they can develop faults and require fixing. In this article, we will discuss how to fix windscreen washer jets.
Step 1: Identify the Problem
The first step in fixing a windscreen washer jet is to identify the problem. The problem could be a clogged nozzle, a broken pump, or a disconnected hose. To identify the problem, turn on the washer jets and observe the water flow. If the water flow is weak or non-existent, the nozzle could be clogged. If the water flow is good, but the water is not reaching the windscreen, the hose could be disconnected.
Step 2: Clean the Nozzle
If the problem is a clogged nozzle, you need to clean it. Start by removing the nozzle from the car. You can use a pin or a needle to remove any debris that might be blocking the nozzle. Once you have removed the debris, flush the nozzle with water to ensure that it is clean. Reinstall the nozzle and test the washer jets again.
Step 3: Check the Hose
If the problem is a disconnected hose, you need to check it. Start by locating the hose that connects the washer pump to the nozzle. Check if it is disconnected or damaged. If it is disconnected, reconnect it to the nozzle and the pump. If it is damaged, you need to replace it.
Step 4: Replace the Pump
If the problem is a broken pump, you need to replace it. The washer pump is usually located in the washer fluid reservoir. You can access it by removing the reservoir. Once you have located the pump, disconnect the wiring and the hoses. Remove the pump and install the new one. Reconnect the wiring and the hoses and reinstall the reservoir.
Step 5: Test the Washer Jets
Once you have fixed the problem, test the washer jets again to ensure that they are working correctly. Turn on the washer jets and observe the water flow. If the water flow is good, and the water is reaching the windscreen, the problem is fixed.
Conclusion
Windscreen washer jets are an essential component of a car’s cleaning system. If they develop faults, they can be fixed easily. The first step in fixing a windscreen washer jet is to identify the problem. The problem could be a clogged nozzle, a broken pump, or a disconnected hose. Once you have identified the problem, you can follow the steps above to fix it. Remember to test the washer jets after fixing the problem to ensure that they are working correctly.
