It’s common to have a flat tire while driving, and it’s important to have a spare tire in case of emergency. However, accessing the spare tire can be a challenge, especially if it’s located underneath the truck. In this article, we’ll guide you on how to get spare tire from under truck.
Locate the Spare Tire
The first step is to locate the spare tire. In most trucks, the spare tire is located underneath the bed of the truck or at the rear of the vehicle. Check your owner’s manual if you’re unsure of the spare tire’s location.
Remove the Spare Tire Cover
Once you’ve located the spare tire, you’ll need to remove the cover that’s protecting it. The cover is usually held in place by a series of clips or screws. Use a screwdriver or pliers to remove the clips or screws and lift the cover off.
Lower the Spare Tire
After removing the cover, you’ll see a mechanism holding the spare tire in place. This mechanism is usually a winch that’s operated by a crank or a lever. Insert the crank or lever into the winch and turn it counterclockwise to lower the spare tire.
Remove the Spare Tire
Once the tire is lowered, you can now remove it from under the truck. Be careful when handling the tire as it may be heavy. If the tire is stuck, try wiggling it back and forth to loosen it.
Replace the Flat Tire
Now that you have access to the spare tire, you can replace the flat tire. Remove the lug nuts from the flat tire using a lug wrench and take the flat tire off. Place the spare tire onto the wheel hub and tighten the lug nuts by hand.
Secure the Spare Tire
After replacing the flat tire, secure the spare tire back onto the winch by turning the crank or lever clockwise. Make sure the tire is properly secured and not loose. Replace the cover over the tire and secure it with the clips or screws.
Check the Spare Tire
Before driving away, make sure to check the spare tire’s pressure using a tire pressure gauge. The recommended pressure should be indicated on the tire itself or in the owner’s manual. If the pressure is low, inflate the tire to the recommended pressure.
Conclusion
Getting a spare tire from under a truck may seem challenging, but it’s a simple process that requires a few basic steps. By following these steps, you can safely access the spare tire and replace a flat tire in case of an emergency.