MyVans Your Vehicle Solution
Installing trucks on a skateboard is an essential skill for any skateboarder. It is a simple process that requires a few tools and some basic knowledge. In this article, we will guide you through the steps of installing trucks on a skateboard, including the tools you need, how to remove the old trucks, and how to install new ones.
Gather the tools you need
Before you begin, you need to gather the tools you need. You will need a skate tool, a wrench, and a screwdriver. If you don’t have a skate tool, you can use a socket wrench or pliers instead. Make sure you have the right size tools for your skateboard.
Remove the old trucks
The first step is to remove the old trucks. Use the skate tool or wrench to loosen the bolts that hold the trucks in place. Once the bolts are loose, remove them and take the old trucks off the skateboard. Be sure to keep the bolts and nuts in a safe place as you will need them later.
Clean the skateboard
With the old trucks removed, take the opportunity to clean the skateboard. You can use a rag or a towel to wipe away any dirt or debris that may have accumulated on the deck. This will help to ensure that the new trucks fit snugly and securely.
Install the new trucks
Now it’s time to install the new trucks. Place the trucks on the skateboard and align the holes with the holes on the deck. Once the holes are aligned, insert the bolts through the holes and hand tighten them. Make sure that the trucks are aligned properly and that they are facing the right way. The kingpin should be facing towards the center of the board.
Tighten the bolts
Using the skate tool, wrench, or pliers, tighten the bolts until they are snug. Be careful not to over tighten them as this can damage the skateboard. Make sure that the trucks are secure and do not wobble or move around.
Test the skateboard
With the new trucks installed, it’s time to test the skateboard. Take it for a spin around the block and see how it feels. If the trucks feel loose or too tight, you can adjust them using the skate tool or wrench. Once you have found the right level of tightness, your skateboard is ready to ride!
People Also Ask
Q: What size trucks do I need for my skateboard?
A: The size of your trucks will depend on the size of your skateboard deck. Generally, you will need trucks that are the same size as your deck or slightly smaller.
Q: How tight should I tighten my skateboard trucks?
A: You should tighten your skateboard trucks enough so that they are secure but not so much that they restrict movement. A good rule of thumb is to tighten them until they are snug and then loosen them slightly.
Q: Can I install trucks on a pre-built skateboard?
A: Yes, you can install new trucks on a pre-built skateboard. Just make sure that the size of the trucks matches the size of the deck and that they are facing the right way.
