MyVans Your Vehicle Solution
If you own a diesel truck, you know that plugging it in during cold weather is essential to make sure it starts easily. But if you’re new to diesel engines, you might not know how to plug in your truck. Here’s everything you need to know:
What You’ll Need
Before you get started, you’ll need a few things:
A Block Heater
A block heater is a small device that you install in your engine block. It helps keep the engine warm, which makes it easier to start in cold weather. Most diesel trucks come with a block heater, but if yours doesn’t have one, you’ll need to buy and install one.
An Extension Cord
You’ll also need an extension cord long enough to reach your truck from your house or garage. Make sure the cord is rated for outdoor use and can handle the wattage of your block heater.
Step 1: Find the Block Heater
The block heater is usually located on the passenger side of the engine block. Look for a small, round plug that’s attached to a cord.
Step 2: Clean the Area Around the Block Heater
Before you plug in your truck, make sure the area around the block heater is clean and dry. Use a clean rag to wipe away any dirt or debris.
Step 3: Plug in the Extension Cord
Plug one end of the extension cord into an outdoor outlet, and the other end into the block heater on your truck.
Step 4: Set a Timer
Set a timer for at least two hours before you plan to start your truck. This will give the block heater enough time to warm up the engine.
Step 5: Unplug the Cord
When you’re ready to start your truck, unplug the extension cord from the block heater.
Step 6: Start Your Truck
Start your diesel truck as you normally would. The engine should start easily, even in cold weather.
Remember to unplug the extension cord after you start your truck. Leaving it plugged in for too long can damage your block heater.
People also ask:
How long should you plug in a diesel truck?
You should plug in your diesel truck for at least two hours before you plan to start it. If the temperature is below zero, you may need to plug it in for longer.
Can you leave a block heater plugged in overnight?
It’s not recommended to leave a block heater plugged in overnight. This can cause your engine to overheat and damage the block heater.
What happens if you don’t plug in a diesel truck?
If you don’t plug in your diesel truck in cold weather, it can be difficult to start. This can cause damage to your engine and other components.
