MyVans Your Vehicle Solution
Programming a Ford Explorer key fob is a simple process that can be done in a matter of minutes. This article will provide step-by-step instructions on how to program the key fob for your Ford Explorer.
Step 1: Gather Your Materials
Before you begin, make sure you have the following materials:
- A working key fob
- The vehicle itself
- The key for the vehicle
Step 2: Enter Programming Mode
Insert the key into the ignition and turn it to the “On” position. Then, press and hold the “Unlock” button on your working key fob for at least 4 seconds, but no longer than 10 seconds. While still holding the “Unlock” button, press and hold the “Panic” button for one second. Release both buttons at the same time.
Step 3: Program the Key Fob
Press any button on the key fob you want to program. The doors should lock and unlock to confirm the programming was successful. Repeat this process for any additional key fobs you want to program. Once you have programmed all of your key fobs, turn the ignition off to exit programming mode.
Step 4: Test the Key Fob
Test the key fob by pressing the buttons to make sure they work properly. If they do not, repeat the programming process.
Can I Program a Key Fob Myself?
Yes, you can program a key fob yourself. The process is simple and can be done in just a few minutes with your working key fob and your vehicle.
Can I Program a Key Fob if I Don’t Have a Working Key Fob?
No, you cannot program a key fob if you do not have a working key fob. In this case, you will need to take your vehicle to a Ford dealer or a qualified locksmith to have a new key fob programmed.
How Much Does it Cost to Program a Key Fob?
The cost to program a key fob can vary depending on the dealership or locksmith you use. However, it typically costs between $50 and $100 to have a key fob programmed.
