MyVans Your Vehicle Solution
Skateboarding is a fun and exhilarating sport that can be enjoyed by people of all ages. One of the essential components of a skateboard is the trucks. The trucks are the metal parts that attach the wheels to the deck. In this article, we will discuss how to put trucks on a skateboard in easy steps.
Gather Your Materials
Before you start putting the trucks on your skateboard, make sure you have all the necessary materials. You will need a skateboard deck, a set of trucks, eight bolts, and eight nuts. You can purchase these materials at any skate shop or online store. It’s important to make sure that the size of the trucks matches the width of the deck.
Remove the Old Trucks
The first step in putting new trucks on your skateboard is to remove the old ones. Use a skate tool or a wrench to loosen the bolts that attach the trucks to the deck. Once all the bolts are removed, lift the old trucks off the deck and set them aside.
Attach the New Trucks
Now that the old trucks are removed, it’s time to attach the new ones. Place the new trucks on the deck, making sure that the kingpin is facing towards the center of the board. Line up the holes in the trucks with the holes in the deck.
Insert the Bolts and Nuts
Once the trucks are lined up with the deck, insert a bolt into each hole. Make sure the bolt goes through the truck and the deck. Once all the bolts are inserted, place a nut on each bolt and tighten them with a skate tool or a wrench. Be sure not to overtighten the nuts, or the board will not turn properly.
Adjust the Tightness of the Trucks
After the trucks are attached, it’s time to adjust the tightness. Use a skate tool to adjust the kingpin’s tightness by turning it clockwise or counterclockwise. The tighter the kingpin, the more stable the board will be, but it will also be harder to turn. The looser the kingpin, the easier it will be to turn, but the board will be less stable.
Test the Board
Once the trucks are attached and adjusted, it’s time to test the board. Stand on the skateboard and try to turn in both directions. If the board turns smoothly, then you’re good to go. If it doesn’t turn smoothly, adjust the tightness of the trucks until it does.
People Also Ask
Q: How tight should I make my trucks?
A: The tightness of the trucks depends on your personal preference. However, a good rule of thumb is to tighten the kingpin until it’s difficult to turn the board, then loosen it slightly until it turns smoothly.
Q: How often should I replace my trucks?
A: It depends on how often you skate and how much wear and tear your trucks endure. Generally, trucks can last for several months to a year before needing to be replaced.
