How to Reset Oil Light on 2012 Ford Focus

5 Views

Oil light is one of the important indicator lights on your dashboard. It flashes when the oil level in your car is low or the oil needs to be changed. If you own a 2012 Ford Focus and the oil light is flashing, then you need to reset it once you have changed the oil. Here are the steps to reset oil light on 2012 Ford Focus:

Fast Read : show

Step 1: Turn on the Ignition

Before resetting the oil light, turn on the ignition without starting the engine. This will activate the dashboard lights.

Step 2: Press the Setup button

Once the ignition is on, press the Setup button on your dashboard. You will find this button on the right side of the steering wheel.

Step 3: Scroll to Vehicle Menu

After pressing the Setup button, scroll down until you find the Vehicle Menu option.

Step 4: Select Oil Life

Once you have found the Vehicle Menu, select the Oil Life option.

Step 5: Press and Hold the Reset Button

After selecting the Oil Life option, press and hold the Reset button for a few seconds. This button is located next to the Setup button.

Step 6: Release the Reset Button

Once you have held the Reset button for a few seconds, release it. The oil light will reset, and you will see a message on the dashboard confirming the reset.

Step 7: Turn Off the Ignition

Now that you have reset the oil light, turn off the ignition and start the engine. The oil light should no longer be flashing.

Step 8: Check the Oil Level

After resetting the oil light, it is essential to check the oil level in your car. Make sure that the oil level is not low, and if it is, add the required amount of oil to your car.

Step 9: Change the Oil Regularly

It is essential to change the oil in your car regularly to prevent engine damage. Follow the recommended oil change intervals in your car’s manual.

Step 10: Consult a Mechanic

If the oil light keeps flashing even after you have reset it, there may be an issue with your car’s oil pressure. In this case, it is best to consult a mechanic.