MyVans Your Vehicle Solution
Starting a Chevy truck with a screwdriver may sound like a strange concept, but it is a useful trick to have up your sleeve when you find yourself in a situation where you have lost your keys or the ignition switch is faulty. In this article, we will guide you through the process of starting a Chevy truck with a screwdriver.
Gather the Tools
Before you start, you will need a few tools to get the job done. You will require a screwdriver that fits the ignition switch of your truck, a pair of pliers, and a wrench. Make sure that the screwdriver you use is not too small or too big, as this may damage the ignition switch.
Find the Ignition Switch
The ignition switch of a Chevy truck is typically located on the steering column. Look for a small hole on the top of the ignition switch where you can insert the screwdriver.
Remove the Cover
Using the pliers, remove the cover from the steering column to expose the ignition switch. The cover is usually held in place by a couple of screws or clips. Once you have removed the cover, you should be able to see the ignition switch.
Insert the Screwdriver
Insert the screwdriver into the hole on the ignition switch and turn it to the right. You should hear a clicking sound, which indicates that the truck’s electrical system has been activated.
Turn the Wrench
Using the wrench, turn the key cylinder clockwise until the engine starts. Be careful not to apply too much pressure, as this may damage the ignition switch.
Remove the Screwdriver
Once the engine has started, remove the screwdriver from the ignition switch. The engine should continue to run normally without the screwdriver in place.
Replace the Cover
Replace the cover on the steering column and secure it with the screws or clips. Make sure that the cover is fitted securely to prevent it from coming loose while you are driving.
People Also Ask
Q: Is it legal to start a Chevy truck with a screwdriver?
A: It is not illegal to start a Chevy truck with a screwdriver, but it is not recommended as it can damage the ignition switch and may cause other problems.
Q: Can I use any screwdriver to start a Chevy truck?
A: No, you should use a screwdriver that fits the ignition switch of your truck. Using the wrong size screwdriver may damage the ignition switch.
Q: What should I do if the screwdriver method does not work?
A: If the screwdriver method does not work, you should contact a professional mechanic to diagnose and repair the problem with your ignition switch.
