MyVans Your Vehicle Solution
As a Ford 6.7 diesel owner, the P20EE error code can be very frustrating. The P20EE error code indicates that there is a problem with the diesel particulate filter (DPF) system. The good news is that this problem can be fixed, and you don’t need to visit a mechanic. In this article, we will discuss how to clean the P20EE Ford 6.7 diesel and get rid of the error code.
Understanding the P20EE Error Code
The P20EE error code is a generic powertrain code, which means it is applicable to all diesel engines. It is a fault code that indicates a problem with the diesel particulate filter (DPF) system. The DPF is responsible for filtering out harmful particulate matter from the exhaust gases of diesel engines. When the DPF becomes clogged, it triggers the P20EE error code.
Cleaning the DPF
The first step in cleaning the P20EE Ford 6.7 diesel is to clean the DPF. There are two ways to clean the DPF: passive regeneration and active regeneration.
Passive Regeneration
Passive regeneration occurs when the vehicle is driven at high speed for an extended period. During passive regeneration, the exhaust gases are hot enough to burn off the particulate matter in the DPF. If you drive your Ford 6.7 diesel regularly on the highway, passive regeneration may occur naturally.
Active Regeneration
If passive regeneration is not possible or does not occur, you can perform active regeneration. Active regeneration is a process where the engine management system increases the temperature of the exhaust gases to burn off the particulate matter in the DPF. To perform active regeneration, you need to follow these steps:
Step 1: Park the Vehicle in a Safe Location
Park the vehicle in a safe location away from flammable materials.
Step 2: Turn Off All Accessories
Turn off all accessories, including the air conditioning and radio.
Step 3: Press the Accelerator Pedal
Press the accelerator pedal to the floor and hold it for 10 seconds.
Step 4: Release the Accelerator Pedal
Release the accelerator pedal and wait for the engine idle to stabilize.
Step 5: Drive the Vehicle
Drive the vehicle at highway speeds for at least 20 minutes.
Step 6: Check for the P20EE Error Code
Check for the P20EE error code. If the error code is still present, repeat the process.
People Also Ask
Q: What causes the P20EE error code in my Ford 6.7 diesel?
A: The P20EE error code is caused by a problem with the diesel particulate filter (DPF) system. The DPF may become clogged with particulate matter, which triggers the P20EE error code.
Q: Can I drive my Ford 6.7 diesel with the P20EE error code?
A: It is not recommended to drive your Ford 6.7 diesel with the P20EE error code. The error code indicates a problem with the DPF system, which could cause further damage to the engine if not addressed.
